Samsung IPOLIS SNP-3300 - Manual (Page 87)

5.3. Sequence Setting
83
- Swing : Auto Run in the corresponding Swing mode
- Group : Auto Run in the corresponding Group number
- Tour : Auto Run in the corresponding Tour number
- Trace : Auto Run in the corresponding Trace number
- A. Pan : 360° Auto Run in Pan direction
Auto Pan Speed: Pan operation in the speed designated by
the user
Tilt Angle: The tilt angle set up by the user is kept.
ƒ Time : Auto Run operation is executed after a certain time
designated by the user.(Time can be set up by the unit of 1-59
sec and 1-59 min.)
5.3.7. Power On Resume
When the power supply for the camera is stopped for some reason,
such as electricity failure, and resumed, the Sequence Settings
before the power off are restored.