Siemens K44 - Manual (Page 12)

12 K44 Duo Installation & User manual
ENG Program codes
Enter A21.
Enter the desired code location using two digits
(01-30).
Enter the code for the current code location (four
digits for code location 01-20 or six digits for
code location 21-30).
Note! The four first digits in a 6-digit code must
not be the same as the digits in a 4-digit code
and the other way around.
Choose whether or not the code should be disa-
bled from a time clock.
0 = no time control
1 = code disabled from time clock 1
2 = code disabled from time clock 2
Choose which relay output to control.
0 = both relay outputs
1 = relay output 1
2 = relay output 2
Program the next code by continuing from step 2
or press B to exit. 1�
2�
3�
4�
5�
6�