Sanyo GH68-24473A - Manual (Page 129)

128
Create a new Wi-Fi connection
1 Tap Start > Settings.
2 On the Basic Settings tab, tap Network Settings > Wi-Fi.
3
Tap Menu > Add New.
4 Enter a network name and configure connection settings.
5 When you are finished, tap Next.
6 Enter network authentication settings and tap Finish or
Next.
7 Set the IEEE 802.1x access option and the extensible
authentication protocol (EAP) type (if necessary).
8 Tap Finish (if necessary).
• The new Wi-Fi network will appear on the Wi-Fi screen. To
connect to the network, drag the network icon to the device
icon in the middle of the screen.
B7610.book Page 128 Saturday, August 1, 2009 11:14 AM