Two-sided copying with bypass tray, Special papers (manual feed) – Sharp AR-287 User Manual

Page 29

Advertising
background image

2-15

CHAPTER

2

Two-sided copying with bypass tray

Two-sided copies can be made manually using the bypass tray,
when the heavy paper which is out of spec. for duplex module is
used.

1

Place the first original face down on the document glass
and make a copy.

The first side of the copy can be made using any of the paper feed
stations.

2

Replace the first original with the second original and
close the document cover.

Make sure the first and second originals are oriented in the same
way on the document glass.

The first and second originals can be set in the document feeder
tray. However, they must be set individually.

3

Turn the first copy over without changing its top-bottom
orientation and place it into the bypass tray.

Be sure to feed the copies one sheet at a time.

4

Press the “PAPER SELECT” key and select the bypass
tray.

5

Press the START key.

SPECIAL PAPERS (manual feed)

MAKING COPIES

Special papers (manual feed)

1 2

1 2

3 4

3 4

1 2

CA

CLEAR ALL

START

R SELECT

100%

COPY RATIO

O 8/ 11

1

2

/ 11

1 17

8/ 11R

1

2

1

2

Advertising