Silvercrest SRD 250 A1 - Manual (Page 15)

13 SRD 250 A1
GB
IE
Handling and operation
Programming the wake time and method
When programming the alarm times, you can select whether,
at the programmed time, alarm tones should sound or the radio
should start playing. Two diff erent alarm times (Alarm 1/Alarm 2)
can be programmed.
Press and hold the AL1 button ♦ 16 or AL2 button 15 . In the display 2
the hour indicator blinks.
Press or hold down the UP button ♦ 12 or DOWN button 10
to set the hour.
Press the AL1 button ♦ 16 or AL2 button 15 again. In the display 2
the minute indicator blinks.
Press or hold down the UP button ♦ 12 or DOWN button 10
to set the minutes.
Press the AL1 button ♦ 16 or AL2 button 15 again. The set wake
time is accepted and in the display 2 appears the wake method
indicator.
Press the UP button ♦ 12 to set the desired wake method ( =
Alarm tone or = Radio).
Press the AL1 button ♦ 16 or AL2 button 15 again to accept the
setting.
NOTICE
If you want to be awakened with the radio, apart from the wake ►
time programming you must also set, additionally, the desired
radio station and volume (see section Radio operation).