Sony GV-D800E - Manual (Page 69)

69
Customizing Your VCR
Bыполнeниe индивидyaльныx нacтpоeк видeомaгнитофонa
Changing the menu settings
Icon/item
AUDIO MIX
PB MODE
A/V t DV OUT
NTSC PB
LCD B. L.
LCD COLOUR
Mode
—––
z AUTO
/
z OFF
ON
z ON PAL TV
NTSC4.43
z BRT NORMAL
BRIGHT
—––
Meaning
To adjust the balance between the stereo 1 and stereo 2
To automatically select the system (Hi8/standard 8 or
Digital8 ) that was used to record on the tape, and play
back the tape
To play back a tape that was recorded in the Hi8/standard
8 system when your VCR does not automatically
distinguish the recording system
To convert digital video signals into analogue video
signals via your VCR
To convert analogue video signals into digital video
siginals via your VCR
“A/V
t DV” appears on the LCD screen ( p. 62)
To play back a tape recorded in the NTSC colour system
on a PAL system TV
To play back a tape recorded in the NTSC colour system
on a TV with the NTSC4.43 mode
To set the brightness on the LCD screen normal
To brighten the LCD screen
To adjust the colour on the LCD screen
Notes on AUDIO MIX
•You can adjust the balance only for tapes recorded in the Digital8 system.
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
Note on PB MODE
The mode will return to the default setting when
– you remove the battery pack or power source.
– you turn the POWER switch to OFF.
Note on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
TV.
Note on LCD B.L.
When you select BRIGHT, battery life is reduced by about 10 percent during recording.
to lighten to darken
(Continued on the following page)
ST1 ST2