Main system screens/ controls – Stanton SCS.4DJ User Manual
Page 35
36
5.1 Startup & Shutdown
-Startup
Upon power up, your SCS.4DJ automatically scans any connected mass storage devices and, if
there is currently a previously created database, scans for changes to your library. If a device has
not been previously used with the SCS.4DJ system, or updated using a computer, the tracks on
your device will be automatically analyzed in the background, allowing you to play songs with basic
pitch and performance controls (though you will lose controls like looping or accurate sync until your
song is analyzed).
5. MAIN SYSTEM SCREENS/ CONTROLS
-Shutdown
To ensure that your connected Mass-Storage devices are not damaged, please make sure to shut
down your SCS.4DJ properly by pressing the
POWER BUTTON momentarily or using the shut-
down option in the
SYSTEM MENU. Once your SCS.4DJ has been powered down, you may safely
remove any connected devices.
WARNING: Do not remove the power cable or unplug the unit to shut it off. This could cause
data corruption to your drive, damaging your songs and other data. In case the unit does not
respond with a shutdown screen, the power button can be pressed and held for 10 seconds
for an emergency shutdown procedure.