Sencore VP300 - Manual (Page 19)

Page 18
Sequence and Burn-In Sub-Menus
Sequence Sub-Menu
Press the +/- buttons to manually step through a sequence of defined tests. Each step
loads a given video format and test image. Menu buttons permit the operator to gate
video color information, change sync types and turn all signal outputs on and off. The firmware
includes a sample test sequence. For the future, custom editing software is planned to allow you
to create and download your own test sequences.
Burn-in Sub-Menu
Uses the Run/Stop menu button to cycle the generator automatically and continuously
through each of the video patterns for the current video format. Menu buttons permit you
to gate video color information, change sync types and turn all signal outputs on and off.
Green color
signal ON/OFF
Red color
signal ON/OFF
Blue color
signal ON/OFF
Line 1: Name of Test Sequence currently running
Line 2: Current step number in sequence
Line 3: Video format used in current step
Line 4: Pattern displayed in current step
Select analog
composite sync
Select digital
composite sync
Select digital
separate sync
Test signal
outputs ON/OFF
Green color
signal ON/OFF
Red color
signal ON/OFF
Blue color
signal ON/OFF
Line 1: Name of Burn-In test currently running
Line 2: Current step number in cycle
Line 3: Video format used in current step
Line 4: Pattern displayed in current step
Select analog
composite sync
Select digital
composite sync
Select digital
separate sync
Test signal
outputs ON/OFF
RUN/STOP
Burn-in Function