Symbol Technologies Spectrum24 AP-4131 - Manual (Page 212)

Hardware Installation
202 AP-4131 Access Point Product Reference Guide
– Check that the radio driver loaded properly.
– Check that the MU PROTOCOL.INI or NET.CFG file is compatible
with the network operating system.
4. Slow or erratic performance:
– Check MU and RF communications range.
– Check antenna, connectors and cabling.
– Verify that antenna diversity setting for AP is appropriate. If using
one antenna, the setting is
Primary Only
, if using both antennas,
the setting is
Full Diversity
(in this setting the radio receives on the
primary or secondary antenna and transmits on the last antenna to
receive a signal)
or
Rx Diversity
(in this setting the radio receives
on the primary or secondary antenna but transmits on the primary
antenna only).
– Verify network traffic does not exceed 37% of bandwidth.
– Check to see that the wired network does not exceed 10 broadcast
messages per second.
– Verify wired network topology and configuration.
4.11 Setting Up MUs
Refer to the LA-4100 Series PC Card & PCI Adapter Product Reference Guide
for installing drivers, client software and testing. Use the default values for
the Net_ID (ESS) and other configuration parameters until network
connection verification.
MUs attach to the network and interact with the AP transparently.