Samsung SHR-9716 - Manual (Page 69)

appendix _ 65
09
A
pp
EN
D
Ix
System Recovery
System Recovery CD allows you to easily recover the
DVR system upon a system error.
Using the System Recovery CD
1. Turn the system on.
2. Insert the System Recovery CD in the CD drive.
3. Restart the system.
4. Press the F8 key during boot up.
5. Once booted from the CD, the following screen will
be shown.
6. Select “2. Start Computer without UDMA Support”.
7. Select Restore Disk to recover the hard disk.
(There is no password.)
8. Click on the OK button to start the recovery
process.
9. Once the recovery process has completed, a
warning tone (beep) will sound.
10. Click on the Reboot button.
11. After restarting, the system will automatically
commence backing up the operating system.
12. Following operating system backup, the system
will automatically restart.
13. Windows will load and launch the DVR software.
The recovery CD can be used to recover the system
when replacing the Windows-installed hard disk
due to a malfunction or when experiencing a critical
system error. For situations not involving physical
damage and other types of critical malfunctions,
hence situations in which the system can be restarted,
the system can be recovered using system recovery
data stored on the hard disk.
 If recovering the system from the hard disk,
it will be possible to maintain and access
recorded data intact. Data damage due
to physical error of the hard disk or a user
error, however, can lead to permanent loss
of existing recorded data.
appendix
SPR-9816-9716.indb 65 2008-07-03 오후 2:48:30