Samsung SHR-8160 - Manual (Page 67)

English _
search & pLa
y
pLayBacK
play
You can play data stored in the HDD and backup a desired portion of the data.
Using the mouse may help easy setup.
In Live mode, click <play> in the right-click menu or
<
> in the launcher menu, or press the Play button on
the remote control or the front panel.
Use the up/down button (▲▼) to select a menu.
For data search, refer to < Search>. (Page 64)
Select a data item and click <play> in the Search menu.
The selected data is played and the play launcher appears
on the screen.
If there is an existing data, < Play> will start immediately without
performing the search.
: You can play up to 4 channels in real time.
- In a split mode, the real time playback may not be
supported, depending on the record quality, resolution
and number of channels. And some frame rates may be
supported.
Playback Information : Displays the date and time of the current data in the top corner.
Mode Switch : Select a desired play mode or press the [mode] button to switch the mode in the sequence
of 1-split, 4-split, 9-split, 16-split and 13-split.
The grey area in the center of the 13-split mode plays the Live channel.
The default channel of the Live mode is CH1, which can be changed later.
: Switches to Live mode.
REC : Records all channels in Live mode.
Play Time : Displays the time and date of the current video.
Play Bar : Displays the time of recorded data in the selected channel for the past 24 hours; the red gridline
indicates the current play time.
Speed : Supports various speed options of x1, x2(-2), x4(-4), x8(-8), x16(-16), x32(-32) and x64(-64).
Slow : Supports slow speed options of x1/2(-1/2), x1/4(-1/4) and x1/8(-1/8).
Backup : Click < > to set the current time to the start
time of backup; you can specify a backup area using the
mouse (yellow triangle).
Click <
> again to set the current time to the end time of
the backup and the “Backup range” window appears.
- Format: Supports formats of DVR, AVI and SEC.
Refer to a list of formats in “setting the Backup”.
(Page 54)
- Device: Select a backup device.
- Check Capacity : Enables you to check the capacity of the
selected storage device.
If you want to return to the Live screen in Play mode, click < > in the launcher menu or press the
[@] button on the remote control or the front panel.
1.
.
`
.
`
~
~
~
`
~
~
~
~
M `
`
~
.
PTZ Alarm Freeze
Scene Mode 
SPOT OUT 
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Launcher hide
Logout
Backup
Used
Free Check capacity
Backup Cancel
Backup Range
 Start  End
2009-01-01 00:01:06 2009-01-01 08:25:45
 Device None  Format DVR
 Folder \20090101\  Filename 0001 change
00769B_SHR-8162_ENG-NEW.indb 67 2008-12-04 오전 10:16:16