Deselecting inputs, Selecting the transmission speed (rs-232c), Selecting the transmission speed – Sharp XG-P20XU User Manual
Page 60: Rs-232c)
Advertising
E-59
Basic Operation
Deselecting Inputs
This function allows you to deselect unwanted signal input. See page
for the procedure details.
• When stack projecting, multi-screen projecting and so on, this function can be used to cancel the RS-232C control.
• Up to two input signals can be blocked for both Input 1, 2, 3 or Input 4, 5.
• For details on intended purpose, see pages
Selecting the Transmission Speed (RS-232C)
This menu allows you to adjust the transmission speed of the RS-232C connection by selecting the
baud rate. See page
for the procedure details.
• Make sure that both the projector and computer are set for the same baud rate. Refer to the computer’s operation manual
for instructions for setting the baud rate.
Advertising