Spalding M86724C - Manual (Page 17)

17 10/05 ID# M86724C
17. After pole has been secured to the anchor plate (2) loosen nut (26),
remove cotter pin (37), and pull out pin (36). This will allow the
removal of the threaded assembly rod (14) which is no longer
necessary for the remainder of the assembly and installation of
system.
35
37
36
24
26
14
25
24
25
ONLY AFTER THE ANCHOR
PLATE HAS BEEN FULLY
TIGHTENED: Remove cotter
pin (37) and pin (36) to
remove threaded assembly
rod (14) from anchor plate (2).
WARNING!