Samsung HT-BD2S - Manual (Page 27)

6
connections
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL 1 or OPTICAL 2) on the main unit to the Digital Output of the
external digital component.
Press the D.In button on the remote control to select D.In 1 or D.In 2 input.
You can also use the FUnCTIOn button on the main unit.
The mode switches as follows : BD/DVD ➞ D.In 1 ➞ D.In 2 ➞ AUx ➞ FM.
To see video from your Cable Box/Satellite receiver, you must connect it's video output
to a TV.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital
components.
1.
.
•
M


Optical Cable
(not supplied)
HT-BD2_XAA_0210.indd 26 2008-02-11 �� 11:27:30