Sanyo PLC-XE33 - Manual (Page 14)

PLC-XE33 Basic Serial Command Specifications
13/22
6.21. Image Cinema Command
Command “C13” [CR]
Detail Set image to Cinema mode.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.22. Image1 Command
Command “C14” [CR]
Detail Set image to Image1 mode.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.23. Image2 Command
Command “C15” [CR]
Detail Set image to Image2 mode.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.24. Image3 Command
Command “C16” [CR]
Detail Set image to Image3 mode.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.25. Image4 Command
Command “C17” [CR]
Detail Set image to Image4 mode.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.26. Image Blackboard (Green) Command
Command “C18” [CR]
Detail Set image to Blackboard (Green) mode.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.27. Image Dynamic Command
Command “C19” [CR]
Detail Set image to Dynamic mode.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]