Sony Cineza VPL-HS2 - Manual (Page 20)

GB
20
Selecting the Wide Screen Mode
Pr
oj
ec
ti
ng
Cutting off the sound
Press MUTING on the remote
control.
To restore the sound, press MUTING again.
To turn off the power
1 Press the [ / 1 (on/standby) switch.
A message “POWER OFF?” appears on the
screen.
2 Press the [ / 1 switch again.
The ON/STANDBY indicator flashes in green and
the fan continues to run to reduce the internal heat.
Also, the ON/STANDBY indicator flashes quickly
during which you will not be able to light up the
ON/STANDBY indicator with the [/1 switch.
3 Unplug the AC power cord from the wall
outlet after the fan stops running and the
ON/STANDBY indicator lights in red.
You can turn off the projector by holding the [/1 (on/
standby) switch for about one second, instead of
performing the above steps.
Selecting the Wide
Screen Mode
You can enjoy various wide screen mode according to
the video signal received. You can also select it using
the menu. (
1 page 26)
Press WIDE MODE.
Each time you press the button, you can select
the “Wide Mode” setting.
+
–
+
–
INPUT LIGHT
STANDARD CINEMA DYNAMIC
USER 2
PICTURE MODE
USER 3 USER 1
DDE MENU APA
MUTING
VOLUME SIDE SHOT
RESET WIDE MODE
ENTER
WIDE MODE button