While using group function – Sony MZ-NH600D User Manual

Page 42

Advertising
background image

42

model name1[MZ-NH600D] model name2[MZ------]

[3-266-467-11(1)]

masterpage:Left

filename[D:\WW08\MORO\3266467111\3266467111MZNH600DU\01GB-

MZNH600DU\040OPE.fm]

The edited tracks
may exhibit sound
dropout during
search operations.

• This occurs due to the MiniDisc system limitation. The fragmentation

of data may cause sound dropout while searching because the tracks are
played in higher speed than normal playback.

There is no R-
channel sound
output when
playing a track
recorded from a
cassette deck or
through an
amplifier, or when
listening to sound
from a cassette deck
or amplifier.

• There is no R-channel output if the cassette deck or an amplifier is

connected with a monaural cord.
, Make sure to use a stereo connecting cord. If, however, the

connected equipment is monaural, there will be no R-channel
sound output even with a stereo connecting cord.

Symptom

Cause/Remedy

While using group function

Symptom

Cause/Remedy

The group function
does not operate.

• While using a disc without group setting, an attempt was made to select

some group-related menu.
, Use a disc with group setting.

A track cannot be
recorded to a new
group. A new group
cannot be created.

• This is due to the MiniDisc system limitations (in MD mode only).

Group information has been written to the area where the disc name is
stored. The disc name and track names are recorded in the same area,
which can store a maximum of approximately 1,700 characters. If the
total number exceeds this amount, a new group cannot be created even
though group mode is on. It is also impossible to make group settings at
this time.

020REG.book Page 42 Wednesday, March 31, 2004 5:41 PM

Advertising