Sharp DV-S1U - Manual (Page 11)

– 11 – EN
9F21
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK
Use audio coaxial digital cables (commercially available) for the audio connections.
R L
AUDIO OUT VIDEO OUT
VIDEO S-VIDEO DIGITAL
Y
P B
P R
To COAXIAL DIGITAL
AUDIO INPUT jack
A/V-compatible
or
wide screen TV
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
To VIDEO INPUT jack To VIDEO OUT jack
or To S-VIDEO INPUT jack To S-VIDEO OUT jack
To COAXIAL DIGITAL
AUDIO OUT jack
[Fig. 4]
CONNECTING TO A TV OR A STEREO TV THAT HAS
COMPONENT VIDEO IN JACKS
Set Dolby Digital and DTS to OFF on the DVD Player. If you play a DVD when the settings are wrong, the
sound will be distorted or you may damage the speakers.
A/V-compatible
or
wide screen TV
Stereo system
To COMPONENT VIDEO
INPUT jacks
To COMPONENT VIDEO OUT jacks
(Y / P
B /P R )
To Right (red) and Left (white)
AUDIO OUT jacks
To ANALOG AUDIO INPUT jacks
R L
AUDIO OUT VIDEO OUT
VIDEO S-VIDEO DIGITAL
Y
P B
P R
[Fig. 5]
Notes
¡ The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound
by an MD or DAT deck.
¡ Be sure to turn off the power to all components in the system before connecting another component.
¡ Refer to the Operation Manuals for the components to be connected to the DVD player.
¡ Set Dolby Digital and DTS to off for audio output in the setup mode. Playing a DVD using incorrect settings
may generate noise distortion, and may also damage the speakers.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD
player to your TV’s 75-ohm coaxial antenna terminal using a Stereo Audio/Video RF Modulator (commer-
cially available). Connect the audio and video outputs of the DVD player to the audio and video inputs on
the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to
the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for
more details.