Samsung DVD-M101 - Manual (Page 17)

Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a
rating - which helps you control the types of DVDs that your family watches. There are up
to 8 rating levels on a disc.
1 1 With the unit in Stop mode, press SETUP button.
The Setup Menu screen appears.
2 2 Use UP/DOWN to select Parental. Press ENTER.
The Parental Control screen appears.
3 3 Use LEFT/RIGHT to select Yes if you want to use
a password. Press ENTER. The Enter Password
screen appears.
4 4 Enter your password. The Re-enter Password
screen appears to confirm the password. Enter
your password again. The Parental Control
screen appears.
5 5 About the Rating Level ;
The Rating Level will work only when Use
Password is set to Yes. To unlock the player,
use LEFT/RIGHT to select No. Use UP/DOWN
to select Rating level. Press ENTER.
- Use UP/DOWN to select the level(e.g. Level 6)
and press ENTER. Discs that contain Level 7 will
now not play.
- To cancel the rating level, use LEFT/RIGHT to
select No in Use Password.
6 6 About the Change Password ;
- Use UP/DOWN to select Change Password.
The Change Password screen appears.
- Enter your new password. Re-enter the new
password again.
e.g Setting up in LEVEL6.
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• If you have forgotten your password, see Forget Password in the Troubleshooting Guide.
32 33
Setting Up the Audio Options
1 1 With the unit in Stop mode, press the SETUP
button.
2 2 Use the UP/DOWN buttons to select AUDIO
OPTIONS. Then press the ENTER button.
3 3 Use the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT button.
Digital Output
1 . PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog
Audio Outputs.
2 . Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
N N N N O O O O TT TT EE EE : Be sure to select the correct Digital Output or
no audio will be heard.
DTS
1 . On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
2 . Off : Doesn’t output digital signal.
Dynamic Compression
1 . On : To select dynamic compression.
2 . Off : To select the standard range.
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• Certain audio features of this product manufactured under a license from Desper
Products, Inc. Spatializer ® and circle-in-square device are trademarks owned by Desper
Products, Inc.
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights
reserved.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
CHANGING SETUP MENU