Shindaiwa GP344 - Manual (Page 4)

4
Unit description
Fuel Filler
Cap
Spark Plug
Recoil Starter
Handle
Air Cleaner
Choke
Throttle
Lever
Discharge
Connection
Handle
Fuel Tank
Stop Switch
Suction
Connection
Filler Plug
Muffler
Drain
Plug
Using the illustrations above as a guide,
familiarize yourself with this unit and its
various components. Understanding the
unit helps ensure top performance, long
service life, and safer operation.
Discharge
Connection
Filler Plug
Fuel Tank
Priming Port
Priming
Port
Specifications
Model GP344
Engine Type 4 cycle air-cooled gasoline engine, vertical cylinder
Displacement 34 cc (38mm x 30mm); 2.07 cu. in. (1.50 x1.18 in.)
Fuel/Oil Ratio 50:1 with *ISO-L-EGD or JASO FD class engine oil
Carburetor Walbro rotary type with primer bulb
Ignition PCI
Spark Plug NGK CMR5H
Plug Gap 0.6 mm / 0.024 inch
Torque 16.7 - 18.6 N∙m / 148 -165 in • lbs
Starting Recoil starter
Stopping Push button
Fuel tank capacity 22.4 oz. (0.6661 liter)
Weight 15.6 pounds (7.1 kg)
Engine Idle Speed 3,000 RPM
Clutch Engagement Speed N/A
Wide Open Throttle Speed (W.O.T.) 7,500 RPM
PUMP
Type General purpose, centrifugal, self-priming
Suction Diameter 1.0 inches (25mm)
Discharge Diameter 1.0 inches (25mm)
Maximum Suction Head (vertical lift) 26.25 feet (8 meters)
Maximum Total Pump Head 157 feet (48 m)
Maximum Pump Discharge 34.8 gal/min (132 liters/min)
Specifications are subject to change without notice.
IMPORTANT
This spark ignition system complies with the Canadian standard ICES-002.