Sony 4-130-033-13(1) - Manual (Page 61)

61 US
Usi
ng
th
e Rem
o
te
/A
ddi
tional
I
n
fo
rm
at
io
n
2
Referring to the following table,
press the corresponding
button for the category you
want.
Example: Press 3.
Now you can use the DVD button to
control the Blu-ray Disc player.
Categories and the
corresponding buttons for BD,
DVD, and SAT
a)
The default setting of the DVD button.
Sony DVD recorders are operated with a DVD1 or
DVD3 setting. For details, refer to the operating
instructions of the DVD recorders.
b)
The default setting of the BD button.
For details on the BD1 or BD3 setting, refer to the
operating instructions of the Blu-ray Disc player
or Blu-ray Disc recorder.
c)
The default setting of the SAT button.
To clear all remote button
assignments
Press MASTER VOL –, ?/1 and DMPORT at
the same time.
The remote is reset to its factory settings.
Glossary
x Digital Cinema Sound (DCS)
A unique sound reproduction technology for
home theater developed by Sony, in
cooperation with Sony Pictures Entertainment,
for enjoying the exciting and powerful sound
of movie theaters at home. With this “Digital
Cinema Sound” developed by integrating a
DSP (Digital Signal Processor) and measured
data, the ideal sound field intended by
filmmakers can be experienced at home.
x Dolby Digital
Digital audio encoding/decoding technology
developed by Dolby Laboratories, Inc. It
consists of front (Left/Right), center, surround
(Left/Right) and subwoofer channels. It is a
designated audio standard for DVD-video and
also known as 5.1 channel surround. Since
surround information is recorded and
reproduced in stereo, more realistic sound with
fuller presence is delivered than with Dolby
surround.
x Dolby Pro Logic II
This technology converts 2 channel stereo
recorded audio into 5.1 channel for playback.
There is a MOVIE mode for movies and
MUSIC mode for stereo sources such as
music. Old movies encoded in the traditional
stereo format can be enhanced with 5.1
channel surround sound.
x Dolby Surround (Dolby Pro
Logic)
Audio processing technology developed by
Dolby Laboratories, Inc. Center and mono
surround information is matrixed into two
stereo channels. When reproduced, audio is
decoded and output in 4 channel surround
sound. This is the most common audio
processing method for DVD-video.
Categories Press
DVD player
(command mode DVD1)
a)
1
DVD recorder
(command mode DVD3)
2
Blu-ray disc player
(command mode BD1)
b)
3
Blu-ray disc recorder
(command mode BD3)
4
DVR
(Digital CATV terminal)
7
DSS
(Digital Satellite Receiver)
c)
8
Additional Information
continued