Sony 4-130-033-13(1) - Manual (Page 69)

69 US
A
d
d
iti
o
n
a
l In
fo
rm
a
tio
n
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(Models of area code UC only)
With 3 ohm loads, both channels driven, from
170 – 20,000 Hz; rated 84 watts per channel
minimum RMS power, with no more than 1%
total harmonic distortion from 250 milliwatts
to rated output.
Amplifier section
Models of area code UC
Power Output
1)
Stereo mode (rated) 84 W + 84 W
(3 ohms at 170 –
20,000 Hz, THD 1%)
Surround mode (reference)
RMS Output
(3 ohms at 1 kHz,
THD 10%)
FRONT
2)
: 143 W/ch
CENTER
2)
: 143 W
SUR
2)
: 143 W/ch
(1.5 ohms at 70 Hz,
THD 10%)
SUBWOOFER
2)
: 285 W
Models of area code MX
Power Output
1)
Stereo mode (rated) 90 W + 90 W
(3 ohms at 1 kHz,
THD 1%)
Surround mode (reference)
RMS Output
(3 ohms at 1 kHz,
THD 10%)
FRONT
2)
: 125 W/ch
CENTER
2)
: 125 W
SUR
2)
: 125 W/ch
(1.5 ohms at 70 Hz,
THD 10%)
SUBWOOFER
2)
: 210 W
1)
Measured under the following conditions:
2)
Reference power output for front, center, surround
speakers and subwoofer. Depending on the sound
field settings and the source, there may be no
sound output.
Inputs
Analog Sensitivity: 1 V/50 kohms
Digital (Coaxial) Impedance: 75 ohms
Tone
Gain levels ±10 dB, 0.5 dB step
Reproduction frequency range:
28 – 20,000 Hz
FM tuner section
Tuning range 87.5 – 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Antenna Loop antenna
Intermediate frequency
450 kHz
General
Power requirements
Power output (DIGITAL MEDIA PORT)
DC OUT: 5 V, 700 mA MAX
Area code Power requirements
UC 120 V AC, 60 Hz
MX 127 V AC, 60 Hz
Area code Tuning scale
10 kHz step 9 kHz step
UC, MX 530 –
1,710 kHz
531 –
1,710 kHz
Area code Power requirements
UC 120 V AC, 60 Hz
MX 127 V AC, 60 Hz
continued