Sony Blu-ray Disc/DVD Home Theatre System BDV-E490 - Manual (Page 51)

Ad
dit
iona
l Inf
o
rma
tion
51 US
The [Control for HDMI] function does not
work (“BRAVIA” Sync).
t Check that [Control for HDMI] is set to [On]
(page 44).
t If you change the HDMI connection, turn the
system off and on again.
t If power failure occurs, set [Control for HDMI]
to [Off], then set [Control for HDMI] to [On]
(page 44).
t Check the following and refer to the operating
instructions supplied with the component.
• The connected component is compatible with
the [Control for HDMI] function.
• The connected component’s setting for the
[Control for HDMI] function is correct.
The system cannot connect to the network.
t Check the network connection (page 20) and
the network settings (page 44).
You cannot connect your PC to the Internet
after [Wi-Fi Protected Setup (WPS)] is
performed.
t The wireless settings of the router may change
automatically if you use the Wi-Fi Protected
Setup function before adjusting the settings of
the router. In this case, change the wireless
settings of your PC accordingly.
The system cannot connect to the network or
the network connection is unstable.
t Check if the wireless LAN router is on.
t Check the network connection (page 20) and
the network settings (page 44).
t Depending on the usage environment,
including the wall material, radio wave
reception conditions, or obstacles between the
system (or USB wireless LAN adapter) and the
wireless LAN router, the possible
communication distance may be shortened.
Move the system and the wireless LAN router
closer to each other.
t Devices that use a 2.4 GHz frequency band,
such as a microwave, Bluetooth, or digital
cordless device, may interrupt communication.
Move the unit away from such devices, or turn
off such devices.
The desired wireless router is not shown in
the wireless network list.
t Press RETURN to return to the previous
screen, and try [Wireless Setup(built-in)]/
[USB Wireless Setup] again. If the desired
wireless router is still not detected, select
[Manual registration].
“BRAVIA” Sync ([Control for
HDMI])
Network connection
Wireless LAN connection