SanDisk e200 - Manual (Page 19)

Sansa_e200_UserManual.doc 18
2) Click on the hardware you’d like to remove.
3) Wait until Safe to Remove Hardware message is displayed.
4) You can now disconnect the Sansa e200 player from the computer.
Basic Usage
Power Button
The power button is used to power on or off, putting the Sansa e200 player
in standby mode as well as resetting it. For initial power-up you must
unlocked the controls by moving the
HOLD switch to the un-locked position
(No Orange Color visible).
Power On
Press the Power Button once to turn on the Sansa e200 device. The
Thumbwheel will light up and the Main Menu will appear after it has
been booted up.
Power Off
To power down the Sansa e200 player, press and hold the Power
Button for approximately 2 seconds or until Goodbye is displayed.
Note: To prevent accidental power on, move the HOLD switch to the
locked position.
Reset
If the Sansa e200 player freezes up, press the Power Button for
approximately 15 seconds. This is like a power down of the device.
Once you perform the reset, the adjustments you made during the last
operation will be gone.
Thumbwheel
Turn the wheel clockwise to scroll down though menu items rapidly or to
increase the volume during playback.