Sharp Notevision PG-A10X - Manual (Page 23)

Connections and Setup
-19
Optional
cable
3RCA to 15-pin D-sub cable
Type: AN-C3CP
(9'10" (3.0 m))
To analog component output terminal
To audio output terminal
DVD player or
DTV
* decoder
Connecting to
Component Video Equip-
ment
Use a 3 RCA to 15-pin D-sub cable when con-
necting to the INPUT 1 terminal, component
video equipment such as DVD players and DTV
*
decoders.
*
DTV is the umbrella term used to describe the
new digital television system in the United
States.
1
Connect the projector to the
video equipment using the 3
RCA to 15-pin D-sub cable.
2
Connect the projector to the
video equipment using a ø3.5
mm minijack to RCA audio cable
(commercially available).
Note
• When connecting the projector to the
video equipment in this way, select
“Component” for “Signal Type” in the
“Picture” menu. See page
37 .
• A ø3.5 mm minijack to RCA audio cable
(commercially available) is required for au-
dio input.
1
3 RCA to 15-pin D-sub cable
(sold separately)
2
ø3.5 mm minijack to RCA audio cable
(commercially available)