Sanyo VPC-C1 - Manual (Page 138)

135
English
DOCKING STATION
Replacing the remote control unit battery
The life of the lithium battery will depend on your use of the remote
control unit, but as a general guideline, it will require replacement about
once a year. Follow the steps below to replace the CR2025 Lithium
battery (sold commercially).
1
Pull out the battery holder from the
remote control unit.
e Push in the tab to release the
battery holder, and then pull it out.
2
Remove the battery.
3
Insert a new battery (CR2025) in the
holder.
e
Wipe the new battery with a soft,
dry cloth, and then insert it with the
(+) mark facing upward.
4
Reinsert the battery holder in the
remote control unit.
5:':A5CP[QDQQM  TVR ''''և'''' ߆ ''ވ''