Macintosh os 10.1, 10.2, and 10.3 – Sharp AR-C265P User Manual
Page 296
Sharp AR-C265P User’s Guide
296
Macintosh OS 10.1, 10.2, and 10.3
For more information, see “General Information” on page
1.
Open the file you want to print.
2.
Click File → Print.
3.
In Output Options, select Save as File.
4.
In Formats, select PostScript.
5.
In the PostScript Settings panel, make your choices for
this print job.
Type: specify the PostScript type.
PostScript Level: this must match the PostScript level of
your printer.
Format: select ASCII or Binary. If you select Binary,
make sure that binary data transfer is supported.
Font Data: specify downloading fonts to the file. If you
are only using PostScript fonts, select None.
6.
Click Save.
7.
At Save as a new name, enter the desired filename.
8.
Specify where you want the file saved (location).
9.
Click Save.