Swann INTERCOM DB-815 - Manual (Page 7)

77
Connecting Wiring
To attach the wiring correctly:
Attach wires to terminals 1-4 on the rear of the indoor Unit by sliding the •
U-shaped connection under the screw terminals.
Screw into place, being careful not to overtighten.
•
Attach a control for an electric lock/door-strike to terminals 5 & 6 and controls •
for an electric gate to terminals 7 & 8 (if applicable).
Attach the bare wire ends into the connections to connections 1-4 on the
•
outdoor Unit using a small screwdriver or a pen (or similar) to push in the small
button atop each wire terminal, and insert the wire.
Release the button and the wire will be clamped firmly in place.
•
Remember: The small U-shaped connection attaches to the indoor unit, whilst the
plain wire end attaches to the outdoor unit.
Suggested wiring solution:
No. Color Function
1 Green Audio
2 Black Ground
3 Blue Video
4 Brown Power
Suggested solution only. All four wires in the cable are identical in every respect except their color. Thus,
provided terminal 1 on the indoor Unit is connected to 1 on the outdoor Unit, and so forth, the color
of the wire used is not particularly important.