Siemens 4110 - Manual (Page 14)

13
Putting the telephone into operation
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 Inbetriebnahme.fm 4.9.02
Step
by
step
Connecting the base
● Only use the plug-in power supply unit provided (as identified on the
underside of the base).
Plug-in power sup-
ply unit
(220/230 V with
mains cable)
● Plug the small
mains cable
connector into
the socket,
● Place the cable
in the cable
channel,
● Connect the
plug-in power
supply unit to
the socket.
● Plug the phone cable’s connector
into the socket (latches into position),
● Place the cable in the cable channel,
● Plug the phone connector into the
phone socket/NTBA.
Phone connector with phone cable
Key for
registering other
handsets
(see page 18)
1
2
Info
Only use the cable provided.
!