Sony BRC-Z330 - Manual (Page 27)

Ad
jus
ting an
d
S
e
tti
ng Wit
h
Men
u
s
PAN TILT ZOOM Menu
27
PAN TILT ZOOM Menu
The PAN TILT ZOOM menu is used to select the pan/
tilt/zoom mode.
PAN-TILT LIMIT
When you set PAN to ON, you can select the limit of pan
operation with the LEFT and RIGHT setting items.
When you set TILT to ON, you can select the limit of tilt
operation with the UP and DOWN setting items.
You can select the following values:
PAN LEFT: END, 174° to –174°, selectable with an
interval of 1°
PAN RIGHT: 174° to –174°, END, selectable with an
interval of 1°
TILT DOWN: END, –29° to 89°, selectable with an
interval of 1°
TILT UP: –29° to –89°, END, selectable with an
interval of 1°
Setting range of PAN LEFT/PAN RIGHT
Setting range of TILT DOWN/TILT UP
Notes
• Before storing the camera position in the preset
memory, perform the PAN-TILT LIMIT setting. If the
camera position is not within the range of the PAN-
TILT LIMIT setting, you cannot store the camera
position in the preset memory.
• The PAN-TILT LIMIT setting is reset to the factory
setting when you change IMG-FLIP of the SYSTEM
menu.
RAMP CURVE
Select the speed acceleration or reduction mode when
the preset operation is recalled.
MODE1: Speed accelerates or reduces most sharply.
MODE2: Speed accelerates or reduces moderately.
MODE3: Speed accelerates or reduces most gently.
D-ZOOM (digital zoom)
When you select digital zoom magnification (4Ч, 2Ч or
1.5×), the selected electronic zoom operates after the
optical zoom (18×). You can zoom up to 72× at
maximum.
When this item is set to OFF, the digital zoom function
is disabled.
Note
Regardless of the D-ZOOM setting, images shot with
the camera are accumulated for the vertical
synchronization period and output from the
RGB/
COMPONENT connector, S VIDEO connector,
<PAN TILT ZOOM>
PAN-TILT LIMIT
> PAN
LEFT
RIGHT
TILT
DOWN
UP
RAMP CURVE
D-ZOOM
OFF
END
END
OFF
END
END
MODE2
OFF
174° –174°
CENTER (±0°)
END
(–175°) END
(175°)
END (90°)
±0°
–29°
89°
END (–30°)