Sony KV-27FA210 - Manual (Page 23)

Connecting Your TV
15
TV, VCR, and Cable Box
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the IN jack
on your VCR.
3
Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
4
If your VCR is equipped with video outputs, you can get better picture quality by
connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
Optional connection
❏ For better picture quality, use S VIDEO inserted of the yellow video cable. S VIDEO does
not provide sound, so you still must connect the audio cables.
Using your TV with this connection
❏ Program your Sony remote control to operate your VCR or cable box (see page 5).
❏ To activate your remote, press to operate your VCR or to operate your cable
box. To do this, first program your remote control, then use the Channel Fix feature to set
your TV to channel 3 or 4 (see page 29).
❏ Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF (local
channels or unscrambled), or cable box (cable system or scrambled channels).
1 3 4 AUDIO OUT
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
S VIDEO
Y
P B
P R
5
3
From
4
1
VCR
2
Rear of TV
Video (yellow)
Audio R (red)
Audio L (white)
cable
Cable Box