Sanyo POA-CH-EX06 - Manual (Page 9)

8
English
Installation Procedure
4
Adjust the vertical tilt (Adjustable range: +5° - –5°)
Loosen the screw ¡ q
located on the left side of the setting plate using the hexagon wrench (3 mm).
Turn the adjustment knob ¡ w
located on the left top side of the setting plate to adjust the vertical tilt.
Tighten the screw ¡ q
which was loosened using the hexagon wrench (3 mm).
5
Adjust the horizontal roll (Adjustable range: +5° - –5°)
Loosen the screw ¡ q
located on the front right side of the setting plate using the hexagon wrench (3 mm).
Turn the adjustment knob
¡ w
located on the right top side of the setting plate to adjust the horizontal roll.
Tighten the screw ¡ q
which was loosened using the hexagon wrench (3 mm).
* “B” marks appear on the setting plate to indicate the locations of the screws and adjustment knob.
* “C” marks appear on the setting plate to indicate the locations of the screws and adjustment knob.
Right side
Screw
q
Adjustment
knob
w
Screw q
Adjustment knob
w
5°
5°
5°
5°