Woodstock W1822 - Manual (Page 8)

-6-
Model W1822 (For Machines Mfg. Since 9/10)
SE
TU
P
The Model W1822 has been carefully packaged for safe
transportation. If you notice the machine has been
damaged during shipping, please contact your authorized
Shop Fox dealer immediately.
Unpacking
SETUP
Inventory
Refer to Figures 1–2 and the listing below to inventory
the contents of the shipping box.
Note: If you can't find an item on this list, check the
mounting locations or examine the packaging materials
carefully. Occasionally we pre-install certain components
for shipping purposes.
Description Qty
A. Sliding Table Assembly ....................................1
B. Support Legs................................................2
C. Foot Pad Assemblies.......................................2
D. Fence Assembly ............................................1
E. Extension Table ............................................1
F. Flip Stop Assembly ........................................1
G. Knurled Pivot Handles ....................................2
H. Mounting Screw Assemblies ..............................3
— Cap Screws M8-1.25 x 30 ..............................3
— Lock Washers 8mm ......................................3
— Flat Washers 8mm.......................................3
If any nonproprietary parts are missing (e.g. a nut or a
washer), we will gladly replace them; or for the sake of
expediency, replacements can be obtained at your local
hardware store.
Figure 1. Shipping inventory items A–D.
A
B
C
D
Figure 2. Shipping inventory items E–H.
E
F
G
H