Samsung SIR-4250 - Manual (Page 11)

COLOR IR CAMERA User’s Manual 21
Using a RS-485 communication, it will be able to control the OSD menu at the
SAMSUNG TECHWIN System Controller or DVR.
(1) The case which it controls from the PC
Using a RS-485 converter, It connects to RS-485 CONTROL TERMINAL outside
camera and serial cable
EX) SERIAL PORT OF THE PC(COM1) — SERIAL CABLE -- RS-485 CONVERTER
-- RS-485 CONTROL TERMINAL
(2)The case which it controls from the DVR or System Controller
It connects the RS-485 CONTROL TERMINAL in the connection terminal of 485
control boards which are connected with the DVR or System Controller.
Connecting to RS-485 CONTROL TERMINAL
• When you construct external control systems for a camera control, please use to
the PELCO-D PROTOCOL.
Notes
CONTROL TERMINAL SPEC
WHITE (TRX+)
RS-485+
BLACK (TRX-) RS-485-
485 CONTROL BOARD CONNECTION TERMINAL RS-485 CONTROL TERMINAL
(+)CONNECTION TERMINAL WHITE (TRX+)
(-)CONNECTION TERMINAL BLACK (TRX-)
Menu
Connection
COLOR IR CAMERA User’s Manual 21 COLOR IR CAMERA User’s Manual 20
RS-485 communication control
Operating Your Camera
SETUP menu
LENS • DC
SHUTTER
• - - - - • FLK
(condition and speed control)
WHITE BALANCE control • ATW • AWC • MANUAL
BACKLIGHT • OFF • LOW • MIDDLE
(Backlight compensation) • HIGH
AGC (Auto Gain control) • OFF • NORMAL • HIGH
SSNR • OFF • LOW • MIDDLE
(Samsung super noise reduction) • HIGH
SENS-UP (Low illuminance) • OFF • AUTO
• CAMERA ID • DAYNIGHT
SPECIAL
• MOTION DET • PRIVACY
• COMM ADJ • IMAGE ADJ
• RESET • RETURN
EXIT