Sony Model DAV-SR4W - Manual (Page 24)

24 GB
Before connecting the AC power cords (mains leads) of this system and the surround speaker (L) to a
wall outlet (mains), connect the front and center speakers to the system and surround speaker (R) to the
surround speaker (L) (see page 14).
When placing the surround
speaker (L) in the (R) position
Depending on the location of the wall outlet
(mains), you can also place the surround speaker
(L) (with the IR receiver) in the (R) position if
necessary.
1
Press " / 1 on the system to turn the
system on.
2
Press AMP MENU.
3
Press X / x repeatedly until
“CUSTOMIZE” appears in the front
panel display, then press ENTER or
c .
The system enters the Customize Menu
mode.
4
Press X / x repeatedly until “SL SR
REV” appears in the front panel
display, then press ENTER or
c .
5
Press X / x repeatedly until the item you
want to set appears in the front panel
display.
x OFF (default)
Sets the surround speaker (L) (with the IR
receiver) in the (L) position.
x ON
Sets the surround speaker (L) (with the IR
receiver) in the (R) position.
6
Press AMP MENU.
The AMP menu turns off.
Step 4: Connecting the AC Power Cords (Mains Leads)
" / 1
AMP MENU
C/X/x/c/
ENTER
With cover opened.