Soleus Air Electroni Window Air Conditioner GM-WAC-10ESE-C - Manual (Page 9)

8
27
″ to 39″
(With accordion panels)
23 ″ min.
(Without accordion panels)
Keep a firm grip on the air conditioner, carefully
place the unit into the window opening so the
bottom of the air conditioner frame is against the
window sill (FIG. 6 & FIG. 6A). Carefully close the
window behind the top rail of the unit.
2
FIG. 6
Extend the side panels out against the window
frame (FIG. 7).
FIG. 8
FIG. 9
3
FIG. 7
FIG. 6A
Place the frame lock between the frame
extensions and the window sill as shown
(Fig. 8). Drive 3/4” (19 mm) locking
screws through the frame lock and into the sill
(FIG. 9).
NOTE: To prevent window sill from
splitting, drill 1/8” (3 mm) pilot holes before
driving screws.
4
Drive 3/4” (19mm) locking screws
through frame holes into window sash
(FIG. 10/11).
5
To secure lower sash in place, attach right
angle sash lock with 3/4” (19 mm) screw
as shown (FIG. 12).
Cut foam seal and insert in the space
between the upper and lower sashes
(FIG. 13).
FIG. 13
6
7
1 1/2” MIN
(38 mm)
FIG. 10
FIG. 11
FIG. 12