Speco Technologies PIR Sensor Camera HT5100BPVFG - Manual (Page 27)

26
●
Exit Setting
Select a desired EXIT mode using the Function Setup Switch.
- SAVE : Save the current settings and exit the MAIN SETUP menu.
- NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.
- RESET : Resets the camera settings to the factory defaults. Language,
Communication and Monitor Settings are not initialized.
1. Power off under -40 degree, the camera becomes frozen
2. On power on, the first temperature sensor starts working and makes heater work.
3. When the internal temperature in camera goes up to -10 degree,
the second temperature sensor starts working and Camera on.
In this status the first and second temperature sensor work together.
4. When the internal temperature in camera goes up to +10 degree,
the first temperature sensor turns off and the only second temperature
sensor keeps working.
Automatic Thermostatic Sensor!