Sony DST-HD500 - Manual (Page 14)

Using the menu system
14 Using the menu system
DST-HD500 2-663-710-11(2)
Parental Control
This option allows you to set a parental guidance level. Programs that
exceed the set level can only be viewed after entering the correct
password.
With the Parental Control option highlighted, press the
b or OK
button. You will need to enter your password to access this menu. The
password is initially set to ‘0000’. For better security, the password
can be changed in the ‘Change Password’ option. Enter your
password as requested using the Numbered buttons on the remote
control. Press the
V or v buttons to highlight the required setting (refer
to the following options). Press the OK button to confirm.
Parental Rating
With the Parental Rating option highlighted, press the
b or OK
button to adjust. Press the V or v buttons to highlight the required
setting (refer to the table below). Press the OK button to confirm.
Install
Select : Confirm : EXIT : BACK :
Quick Scan
Manual Scan
Program Edit
Favorite Preset
Parental Control
Sets a parental rating and changes password.
Block All All programs need a password to view.
Block G and above To lock ‘General’ and above programs.
Block PG and above To lock ‘Parental Guidance’ and above
programs.
Block M and above To lock ‘Mature’ and above programs.
Block MA and above To lock ‘Mature Adult’ and above programs.
Block AV and above To lock ‘Adult/Violence’ and above programs.
Block R and above To lock ‘Restricted’ and above programs.
No Block (default setting) No programs need a password to view.
Change Password
This option allows you to change the default password (0000) to a
more memorable one.
With the Change Password option highlighted, press the b or OK
button to adjust. Enter the new password using the Numbered
buttons on the remote control. Enter the new password again.
DST-HD100A.book Page 14 Saturday, September 17, 2005 5:36 AM