Sharp 66GS-62H - Manual (Page 8)

7
Auto Installation System
Your television set is provided with an Automatic Installation System
which makes installation easier.
This new system is activated when you turn on the TV for the first time.
Procedure:
1. Connect the antenna jack in the antenna input terminal on the rear side
of your TV-set. Then connect the TV power cable to a 220 ~ 240V a.c.
system.
2. Press the main power button ( ®), on the right hand side of the TV set,
and the AUTO INSTALLATION message will appear on the screen.
3. Put batteries into the remote control and follow the instructions on
the screen.
The TV will go through the following steps Automatically and sequentially:
Automatic Channel Sorting System (ASS): The TV set SEARCHES FOR
FREQUENCIES, memorises the channels found, and sorts them (accor-
ding to technical criteria) from Pr-01 of the TV, to a maximum of 99 pro-
grammes.
This tuning system may take several minutes to perform.
Editing: When the AUTOMATIC SEARCH has been completed, the list of
memorised programmes appears. In this menu, you can change the order
of the channels and change or give the channels a four letter name.
NOTE: You may not have to follow this procedure if it has already been
done for you at the establishment where you purchased your TV. If this is
the case, please go on to the section entitled «Switching ON» (page 9).
If you need to repeat the AUTO INSTALLATION, read on.
TO REPEAT THE AUTO INSTALLATION
1. Press the MENU button
b to see the Main Menu.
2. Press the BLUE button to see the «TUNING Menu».
3. Press the Cursor UP button to select AUTO-TUNE.
4. Press the MENU button b to start the AUTO INSTALLATION.
Stored programmes
When the TV has finished the automatic search, the «Stored
programmes» menu will appear on screen with a list of the channels
which have been memorised with the available options:
a) Select programme to be edited Ǟ /
b) Edit this program Ǟ Red button
c) Go to sorting mode Ǟ Green buton
d) Delete this program
Ǟ Yellow button
e) Exit this menu Ǟ Blue button
With these options, you will be able to organise the real channels (CH **)
memorised in the TV programmes (Pr 01 … Pr 99) and put them into your
own preferred order.
The following is a detailed explanation of options a), b),c), d) and e), on
page 8.
CH CH
CH
Auto Installation
Pr 01 CH21 BBC1
Pr 02 CH31 BBC2
Pr 03 CH41 ITV
Pr 04 CH51 CH4
Pr 05 CH61 CNN
Pr 06 –––– ––––
Pr 07 –––– ––––
Pr 08 –––– ––––
Pr 09 –––– ––––
Pr 10 –––– ––––
Stored programmes:
२ Edit this program
२ Go to sorting mode
२ Delete this program
२ Exit this menu
Be sure the antenna cable ...
Press any button in
the handset to start.
Searching,
please wait.
Pr 01
01 %
SHARP
AUTO INSTALLATION
(red)
(green)
(yellow)
(blue)
Power Indicator
Main power button
1., 4.
3. 2.