Using the videoplus+ feature – Samsung SV-645B User Manual
Page 15
GB
25
Using the VIDEOPLUS+ Feature
★
(SV-645B/SV-643B Only)
Before presetting your VCR:
◆ Switch on both the television and your VCR
◆ Check that the date and time are correct
◆ Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1
Press the TIMER button.
Result:
The
TIMER METHOD
is displayed.
2
Press the corresponding
"
or
❷
buttons, until the
VIDEOPLUS
option is selected.
3
Press the
❿!
button to select
VIDEOPLUS
.
Result:
A message is displayed to allow you to enter the
VIDEOPLUS+ code.
☛
If all six programmes have been set, the message
TIMER
IS FULL
is displayed. Refer to page 28 if you wish to
cancel a preset recording.
4
Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
➢
If you wish to correct the VIDEOPLUS+ code that you are
entering:
◆
Press the
➛
button until the digit to be corrected is
cleared
◆
Enter the correct digit
5
Press the MENU button.
Result:
The information concerning the programme is displayed.
☛
When using the VIDEOPLUS+ function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the
"
or
❷
buttons. Refer to the following page if:
◆
The programme number or times flash
◆
You wish to modify the programme
6
If the programme and times are correct, press the MENU button.
7
Press the STANDBY/ON button to activate the timer.
8
Refer to page 28 if you wish to:
◆
Check that your VCR has been programmed correctly
◆
Cancel a preset recording
☛
The numbers next to each TV programme listing are
VIDEOPLUS+ code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the VIDEOPLUS+ code for the programme
you wish to record.
™ VIDEOPLUS+ is a trademark of Gemstar Development Corporation. The VIDEOPLUS+
system is manufactured under licence from Gemstar Development Corporation.
SPEED DUB TV/VCR TIMER
1
VIDEOPLUS
CODE ---------
CODE:
0-9
CORRECT:
➛
END:
MENU
** TIMER METHOD **
STANDARD
VIDEOPLUS
"
❷
❿
END:
MENU
STANDBY/ON EJECT
SLOW
SHUTTLE
PROG
1/JAN MON 21:28
PR DAY START
→
STOP
V/P
1 MO 1 12:00
→
12:50SP ON
-- ---- --:--
→
--:----
-
-- ---- --:--
→
--:----
-
-- ---- --:--
→
--:----
-
-- ---- --:--
→
--:----
-
-- ---- --:--
→
--:----
-
"
❷
➛❿
DELETE:
CLR/RST
MENU
7