Sony ZS-M7 - Manual (Page 46)

The Timer
46 GB
Timer-recording
radio programs
You can set timer to record the radio at a
certain time. You can also record from
the component connected to the LINE
IN jack of the player.
Make sure you have set the clock (see
“Setting the clock” on page 42).
Before you begin, make sure “TIMER PLAY” or
“TIMER REC” is not displayed. If either one is
displayed, press STANDBY.
1
Tune in the radio station and insert an MD.
2
Press TIMER.
“TIMER PLAY” or
“TIMER REC” flashes in
the display.
Make the following settings by checking the
indications in the display.
3
Turn the jog dial until “TIMER REC” flashes in the
display, and press ENTER•YES.
4
Turn the jog dial until “RADIO” flashes in the
display, and press ENTER•YES.
When recording from the component connected to
the LINE IN jack of the player, turn the jog dial
until “LINE” flashes in the display, and press
ENTER•YES.
5
Set the timer to the hour and the minutes you want
to start recording.
1 Turn the jog dial to
set the hour and
press ENTER•YES.
2 Turn the jog dial to set the minutes, and press
ENTER•YES.
Notes
• You cannot preset
recording timer and
waking up timer (page
44) at the same time.
• When recording from
the component
connected to the LINE
IN jack of the player,
refer to the operating
instructions of the
component.
Tip
If you made a mistake,
press CANCEL•NO.
The setting entered last
will be cleared. Re-
enter it.
STANDBY
ENTER•YES
Jog dial
TIMER