Finisher (ar-fn1n), Part names, Specifications – Sharp AR-337 User Manual

Page 115

Advertising
background image

7-3

CHAPTER

7

FINISHER (AR-FN1N)

The copier has two different finisher modes: one sorts copies into sets matching the sequence of the originals and the
second groups copies by original. When the optional finisher (AR-FN1N) is installed, the copier can automatically
staple the sorted copies. Each collated set of copies or group of copies can be stacked offset from the previous set.

PART NAMES

OPTIONAL EQUIPMENT

Finisher (AR-FN1N)

The top tray and second tray are each furnished with an extendable component, which is to be used when copying
onto size 11" x 17" paper.

Specifications

Tray capacity

Top tray:

500 sheets

Second tray:

500 sheets

Offset tray:

1,500 sheets (8-1/2" x 11")
750 sheets (larger than 8-1/2" x 11")

Paper size

Top tray:

5-1/2" x 8-1/2" to 11" x 17"

Second tray:

5-1/2" x 8-1/2" to 11" x 17"

Offset tray:

8-1/2" x 11" to 11" x 17"

Paper weight

Top tray:

14 lbs. to 34 lbs. (when face up)
17 lbs. to 28 lbs. (when face down)

Second tray:

17 lbs. to 28 lbs.

Offset tray:

17 lbs. to 34 lbs. (when face up)
17 lbs. to 28 lbs. (when face down)

For paper weighing more than 28 lbs., 8-1/2" x 11" is
the maximum size.

Offset

1.2 inch (30 mm)

Paper size

8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17"

for stapling

Stapling capacity

50 sheets (20 lbs.)
(25 sheets for 8-1/2" x 14" and 11" x 17" paper)

Power supply

Drawn from the copier

Weight

Approx. 111 lbs. (50 k

g

)

Dimensions

23-15/64"(W) x 22-1/16"(D) x 39-19/64"(H)

(590 mm (W) x 560 mm (D) x 998 mm (H))

Specifications are subject to change for improvement without notice.

Finisher release lever

Top tray

Second tray
(not used in the copy mode)

Stapler unit

Paper transport area cover

Paper feed area cover

Top cover

Offset tray

When copying onto size 11” x 17”
paper, lower the metal support
located at the tip of the offset tray.

Advertising
This manual is related to the following products: