Samsung BN68-01171B-03 - Manual (Page 49)

English - 49
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected
to the TV.
Anynet+ Menu Description
View TV Switches from Anynet+ to TV broadcast mode.
Select Device Your TV connects to the corresponding device.
Record Starts a recording. (This menu works only for a device supporting
recording.)
Menu on Device Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder’s
title menu appears.
Device Operation Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control
menu of the DVD Recorder appears.
Receiver Sound is output through the receiver.
Setup You can set the environment for using Anynet+.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type Operating Status Available Buttons
Anynet+ Device
After switching to the
device, when the menu of
the corresponding device is
displayed on the screen.
Numeric buttons
▲/▼/◄/►/ ENTER buttons
Color buttons
EXIT button
After switching to the device,
while playing a file
◄◄(Backward search)
►►(Forward search)
 (Stop)
►

(Play/Pause)
Device with built-in Tuner
After switching to the device,
when you are watching a TV
program
CH ▲/▼ button
Audio Device When Receiver is activated
VOL +/- button
MUTE button
Anyview2 When watching TV ►

(Play/Pause)
➢ The Anynet+ function only works when the remote control is set to TV.
➢ The REC button works only while in the recordable state.
➢ You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+
devices only using the TV remote control.
➢ The TV remote control may not work under certain conditions. In this case, re-select the Anynet+
device.
➢ The Anynet+ functions don’t operate for the products from other manufacturers.
➢ In Anynet+ mode, the color buttons may not work properly.
➢ The ◄◄, ►► operations may differ depending on the device.
Recording
You can make a recording of a TV program using a recorder.
Press the
REC button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➢ The current TV program is recorded in the Watching TV status. If you are watching video from
another device, the video from the device is recorded.
➢ You can also record the source streams by selecting Record after pressing the Anynet+ button.
➢ Before recording, check whether the antenna jack is properly connected to the recording device.
For the antenna connection to the recording device, refer to its user manual.
BN68-01171A-03Eng_0319.indd 49 2007-03-19 ｿﾀﾈﾄ 3:40:41