SECO-LARM USA NVD Bullet Cameras EV-1626-NKGQ 2.8~12mm - Manual (Page 10)

On-Screen Display Manual
10 SECO-LARM
U.S.A., Inc.
Day / Night:
1. Select DAY / NIGHT using the UP and
DOWN buttons on the SETUP menu screen.
2. Select the desired mode using the LEFT
and RIGHT buttons.
A. DELAY: Set the delay before switching to
NIGHT mode.
Adjustable range: 1~63 seconds.
B. S-LEVEL (start level): Define light level to
trigger B/W mode.
Adjustable range: 0~100.
C. E-LEVEL (end level): Define the light level
to trigger COLOR mode.
Adjustable range: 0~100.
 COLOR: The picture is always displayed in color.
 B / W: The picture is always displayed in black and
white.
 AUTO: The mode automatically switches to
COLOR in normal situations and B / W when
ambient light is low. To set the time and speed in
AUTO mode, press the SET button.
3DNR (DNR with 3D filtering):
1. Select 3DNR using the UP and DOWN
buttons. Configure the settings to filter
background noise in low-light environments.
2. Activate 3DNR by using the LEFT and RIGHT
buttons.
 ON: Activate 3DNR. Digital noise ratio can be
adjusted between 0~100.
 OFF: Deactivate 3DNR. Noise is not reduced.
3. Select RETURN by using the UP and DOWN
buttons to return to the SETUP menu.