Sony D-NE10 - Manual (Page 23)

23
Stopping playback
automatically
(OFF TIMER)
You can set the CD player to stop playback
automatically within a range of 1 to 99
minutes. While the timer function is working,
“,” appears in the display of the remote
control.
1
Press DISPLAY until the display
changes.
2
Flick the jog lever toward . or
> to select “TIMER,” then press
the jog lever to enter the selection.
3
Flick the jog lever toward . or
> to select “10 min*.”
* Default setting. If you have changed the
setting, the length of time already set
appears.
4
Turn VOL +/– to select the length
of time you want to set, then press
the jog lever to enter the selection.
• To increase/decrease by 5 minutes:
Turn VOL +/– repeatedly.
• To increase/decrease by 1 minute:
Keep turning VOL +/–.
To return to the previous screen
Press x.
To cancel the setting operation
Press DISPLAY or x for 2 seconds or more.
To check the length of time before the
CD player stops playback
During play, perform steps 1 - 3.
To cancel the OFF TIMER function
Perform steps 1 - 3, changing the OFF
TIMER setting to “OFF.”
Locking the controls
(HOLD)
You can lock the controls on your CD player
to prevent accidental button presses.
The OPERATION lamp flashes if you press
any button when the HOLD function is
activated.
Slide HOLD in the direction of the
arrow.
You can use the HOLD function with both
the CD player and the remote control. You
can still operate your CD player using the
remote control when HOLD on the remote
control is set to off.
To unlock the controls
Slide HOLD in the direction opposite to that
of the arrow.
Note
Even if the HOLD function is working, “HOLD”
will not appear in the display of the remote control.
A
vailable featur
es