Samsung SVD-4600 - Manual (Page 11)

COLOR CCD CAMERA User Guide 20 COLOR CCD CAMERA User Guide 21
Operating Your Camera
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ‘SSNR’ by using the Function
Setup switch so that the arrow indicates ‘SSNR’ .
2. Select a desired mode using the Function Setup switch.
OFF : Deactivates SSNR. Noise is not reduced.
ON : Activates SSNR so that noise is reduced.
SSNR
3. Set the SSNR mode to ‘ON’ and press the Function Setup switch. Then you can
adjust the noise reduction level.
• You cannot set the SSNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE
menu is ‘OFF’.
• When adjusting the noise reduction level of the SSNR mode, remember that the
higher the level set, the more the noise level will be reduced but that after image
may also occur.
Notes
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the
Function Setup switch so that the arrow indicates ‘DAY/NIGHT’.
DAY/NIGHT
2. Select a desired mode using the Function Setup switch according to the picture
display you want.
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and
white. Please press SETUP button to turn on
or off the burst signal on B/W mode.
AUTO : The mode is switched to ‘Color’ in a normal
environment, but switches to ‘B/W’ mode
when ambient illumination is low. To set up
the switching time or speed for AUTO mode,
press the Function Setup switch.
- DWELL TIME : You can select the duration time about
changing the day/night mode.
→ 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT OFF
5.SSNR ON
6.DAY/NIGHT AUTO
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.BACKLIGHT OFF
5.SSNR ON
6.DAY/NIGHT AUTO
7.IMAGE ADJ
- DURATION : You can select brightness of illumination about changing the
day/night mode.