Sirius Satellite Radio SDSV6V1 - Manual (Page 33)

33
area under the interior trim, towards the front of the vehicle .
Use a blunt plastic putty knife or similar blunt tool to lift the
plastic trim just enough to tuck the cable under underneath .
Avoid side airbag locations on back pillars and above the doors .
Airbag locations are marked with “SRS” logos . Be careful not
to crimp or cut the cable .
5 . Bring the cable out from the trim near the front of the cabin
and route it under the carpet toward the dashboard or console .
Coil any excess cable in a hidden location, such as under the
carpet, keeping it away from any vehicle pedals or controls .
Secure the excess cable with wire ties (purchased separately) .
6 . Bring the end of the cable out at the PowerConnect Vehicle
Dock location . Leave yourself enough cable so you can easily
connect it to the antenna connector of the dock .
7 . Continue with “Step 5: Connect the Magnetic Mount Antenna
and PowerConnect Power Adapter” on page 39 .