Samsung NC10 - Manual (Page 3)

3-3
3. Disassembly and Reassembly
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -
NC10
Part Picture Description
Main
System
9. As shown in the picture, separate the BOTTOM-
COVER(LAN Connector side first) by widening the gap
between the BOTTOM-COVER and the TOP. (Be careful
not to make scratch in the gap using a wooden-driver.)
As shown in the picture, separate the BOTTOM-COVER
by widening the gap between the BOTTOM-COVER and
the TOP. (Be careful not to make scratch in the gap using a
wooden-driver.)
10. After removing the Screw for fixing HDD remove the
INSULATOR by lifting the HDD up to about 70 degrees
direction.
[Notice]
When you life the HDD up, you shall not enforce excessive
strength.
11. Speaker CONN. INT Mic CONN., Power S/W CONN.
Touch-Pad FPC.
Winchester_NC10_Eng.indb 3 2008-09-20 오후 1:36:22