Sharp AQUOS 09P09-MX-NM - Manual (Page 16)

14
■ When using HDMI-DVI conversion cable (INPUT 6):
AUDIO DVI OUT
Rear of the TV
HDMI-DVI conversion cable
Ø 3.5 mm stereo minijack cable
• When using an HDMI-DVI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting an HDMI-DVI conversion cable to the INPUT 6 (HDMI) terminal, connect an audio cable to the AUDIO terminal
and set "PC Audio Select" to "Input 6 (HDMI)". (See page 40.)
■ When using analog RGB cable:
AUDIO RGB
Rear of the TV
Ø 3.5 mm stereo minijack cable
RGB cable
• When using an analog RGB cable, input the audio signal to the AUDIO terminal of INPUT 4.
• When connecting a PC to the INPUT 4, set "PC Audio Select" to "Input 4 (PC)". (See page 40.)
■ When using RS-232C serial control cable:
RS-232C
Rear of the TV
RS-232C serial control cable (cross type)
Connecting to External Equipment