Siemens optipoint 200 - Manual (Page 6)

6
Gigaset 200, GBR, A31008-G200-B101-1-7619 VORBEREI.FM 28.09.01
Putting your phone into operation
Step 1: Connect up the base unit
For the analog landline network
● Insert the small connector of the power cable
into the socket.
● Insert the cable in the cable duct.
● Plug the 3-pin adaptor into a mains power socket
and switch on.
● Insert the small connector of the line cord into
the socket (engages).
● Insert the cable in the cable duct.
● Insert the phone connector in the phone socket.
2
1
1 2
Plug-in power supply unit with
power cable (220/230 V)*
Phone connector
with phone cable
*Country-specific